WD-9 Wig Dryer - Heater Box Assembly Removal
This tutorial provides step-by-step instructions on how to replace the heater assembly in the W9 Wig Dryer. The heater unit is designed to come out as a complete assembly, and this guide shows you how to safely and efficiently remove it, including the tools needed and key steps to follow.
Step-by-Step Guide:
1. Gather Your Tools
- Required Tools:
- 7/16-inch wrench
- Cardboard box (for support during removal)
2. Prepare the Heater Assembly for Removal
- Position the Dryer:
- Place a cardboard box under the heater assembly to support it while you remove the bolts.
3. Loosen the Bolts
- Loosen the Bolts:
- Using the 7/16-inch wrench, begin by loosening the top bolts. You may find it helpful to use one of the bolts as a grip to ease the process. Remove these bolts carefully.
4. Remove the Heater Box
- Unscrew the Remaining Bolts:
- The heater assembly is secured by eight bolts: four on each side. Use your wrench to remove these hex-head bolts.
- Make sure all bolts are fully loosened to allow the assembly to come free.
5. Disconnect the Heater Box
- Pull the Heater Box Out:
- Once all bolts are removed, carefully pull out the heater box assembly.
- Be aware that the assembly has a wiring connection from the back, which you will need to carefully disconnect.
6. Check Heater Assembly and Order Parts
- Examine the Heater Box:
- The heater box is a complete unit. If you need to replace it, provide your original order number to ensure the replacement matches the laminate color and specifications.
- The unit can be serviced either as a complete assembly or by replacing individual components.
Conclusion:
By following these steps, you have successfully removed the heater assembly from the W9 Wig Dryer. You can now replace it with a new one or proceed with any necessary maintenance on the existing assembly. If you need further assistance with the maintenance, additional resources or videos may be available to guide you through servicing individual components.