Skip to content
  • There are no suggestions because the search field is empty.

How to Mount a Collins Tool Holder

This tutorial provides step-by-step instructions on how to securely mount a tool holder inside a vanity station or wall tower station using a French cleat system. It ensures the tool holder remains stable and secure during use. Tool holders are often mounted inside cabinets using a French cleat system for easy installation and stability. This guide explains how to properly attach a tool holder to ensure it stays secure, even during frequent door use.

 

1. Understand the Components

  1. French Cleat System:

    • The French cleat consists of two parts:

      • One piece is bolted to the door or cabinet wall.

      • The other piece is attached to the tool holder.

    • These pieces interlock to securely hold the tool holder in place.

  2. Tool Holder:

    • Contains small holes for securing screws to prevent movement.


2. Position the French Cleat

  1. Attach the French Cleat to the Cabinet:

    • Bolt the French cleat to the inside of the door or the wall of the cabinet.

    • Ensure it is level and at the desired height.

  2. Attach the Cleat to the Tool Holder:

    • Verify that the cleat on the tool holder aligns correctly with the one inside the cabinet.


3. Mount the Tool Holder

  1. Engage the Cleat:

    • Position the tool holder so its cleat aligns with the cabinet cleat.

    • Slide the tool holder down onto the French cleat until it locks in place.

  2. Secure the Tool Holder:

    • Locate the small holes on the tool holder.

    • Insert a screw into each hole and tighten to prevent the tool holder from bouncing off the cleat during use.

    • These screws provide additional stability, especially when the holder contains tools or cords.


4. Final Checks

  1. Stability Test:

    • Ensure the tool holder is securely attached and does not wobble.

  2. Close the Door:

    • Open and close the cabinet door to confirm the holder remains stable and does not dislodge.

  3. Add Tools:

    • Place your tools in the holder and ensure it supports the weight without issues.


By following these steps, you can securely mount a tool holder inside your cabinet, ensuring it remains functional and stable during use.